Items where Research Group is "Materials, Manufacturing & Process Modelling

Group by: Creators | Item Type | Status | No Grouping
Number of items: 8.

Dowding, C. (2010) Laser ablation. In: Advances in Laser Materials Processing. Elsevier, pp. 575-628. ISBN 9781845694746

Dowding, C. F. and Lawrence, J. (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, C. F. and Lawrence, J. (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects on the etch rate. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, C. F. and Lawrence, J. (2010) Topography of features machined into bisphenol a polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, C. F. and Lawrence, J. (2010) The impact of medium chemistry on flowing liquid closed immersion ablation of bisphenol a polycarbonate. Lasers in Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, C. F. and Lawrence, J. (2010) A proposed concept of a system for the removal of debris produced during laser micromachining. Lasers in Engineering, 20 (1-2). pp. 65-85. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Liu, Dianzi, Toropov, Vassili V., Zhou, Ming, Barton, David C. and Querin, Osvaldo M. (2010) Optimization of blended composite wing panels using smeared stiffness technique and lamination parameters. In: UNSPECIFIED.

This list was generated on Thu Nov 21 08:31:18 2024 UTC.