Experimental study on shear properties of porous metal fiber sintered sheet

Wan, Zhenping, Liu, Bin, Zhou, Wei, Tang, Yong, Hui, K. S. and Hui, K. N. (2012) Experimental study on shear properties of porous metal fiber sintered sheet. Materials Science and Engineering A, 544. pp. 33-37. ISSN 0921-5093

Full text not available from this repository. (Request a copy)

Abstract

A novel porous metal fiber sintered sheet (PMFSS) with high porosity was fabricated by the solid-state sintering method of copper fibers. In this study, the shear experiments were conducted to investigate the effect of porosity and sintering parameter on the shear properties of PMFSS. The typical shear stress-strain plot of PMFSS was obtained based on a larger number of shear test results. The shear fracture process of PMFSS was then divided into three steps: linear elastic stage, plastic deformation stage, and shear fracture stage. The shear strength was found to be decreased with increasing porosity ranging from 70% to 90% when the PMFSS was produced under the same sintering parameter. Moreover, the influence of sintering parameter on shear strength of PMFSS was also investigated. Our experimental results showed that the increase of the sintering temperature or holding time would give rise to the increase of shear strength of PMFSS.

Item Type: Article
Uncontrolled Keywords: microstructure,porous materials,shear properties,sintering
Faculty \ School: Faculty of Science > School of Mathematics
Related URLs:
Depositing User: Pure Connector
Date Deposited: 04 Oct 2016 12:02
Last Modified: 30 Aug 2019 15:32
URI: https://ueaeprints.uea.ac.uk/id/eprint/60686
DOI: 10.1016/j.msea.2012.02.070

Actions (login required)

View Item View Item