3D Printing of an Aortic Aneurysm to Facilitate Decision Making and Device Selection for Endovascular Aneurysm Repair in Complex Neck Anatomy

Tam, Matthew D. B. S., Laycock, Stephen D., Brown, James R. I. and Jakeways, Matthew (2013) 3D Printing of an Aortic Aneurysm to Facilitate Decision Making and Device Selection for Endovascular Aneurysm Repair in Complex Neck Anatomy. Journal of Endovascular Therapy, 20 (6). pp. 863-867. ISSN 1526-6028

Full text not available from this repository. (Request a copy)

Abstract

Purpose: To describe rapid prototyping or 3-dimensional (3D) printing of aneurysms with complex neck anatomy to facilitate endovascular aneurysm repair (EVAR). Case Report: A 75-year-old man had a 6.6-cm infrarenal aortic aneurysm that appeared on computed tomographic angiography to have a sharp neck angulation of ∼90°. However, although the computed tomography (CT) data were analyzed using centerline of flow, the true neck length and relations of the ostial origins were difficult to determine. No multidisciplinary consensus could be reached as to which stent-graft to use owing to these borderline features of the neck anatomy. Based on past experience with rapid prototyping technology, a decision was taken to print a model of the aneurysm to aid in visualization of the neck anatomy. The CT data were segmented, processed, and converted into a stereolithographic format representing the lumen as a 3D volume, from which a full-sized replica was printed within 24 hours. The model demonstrated that the neck was adequate for stent-graft repair using the Aorfix device. Conclusion: Rapid prototyping of aortic aneurysms is feasible and can aid decision making and device delivery. Further work is required to test the value of 3D replicas in planning procedures and their impact on procedure time, radiation dose, and procedure cost.

Item Type: Article
Uncontrolled Keywords: abdominal aortic aneurysm,aortic model,aortic phantom,replica,rapdi prototyping,computed tomography,endovascular aneurysm repair,stent-graft,decision making,3d printing,device deployment
Faculty \ School: Faculty of Medicine and Health Sciences > Norwich Medical School
Faculty of Science > School of Computing Sciences
Faculty of Science > School of Biological Sciences
Related URLs:
Depositing User: Pure Connector
Date Deposited: 18 Dec 2013 12:42
Last Modified: 28 Oct 2022 13:34
URI: https://ueaeprints.uea.ac.uk/id/eprint/47071
DOI: 10.1583/13-4450MR.1

Actions (login required)

View Item View Item